CHEMICAL INFO AND ORDER FORM
SPA CARE AND CHEMICALS
To keep your spa clean and safe to enjoy means
treating the water to control bacterial growth,
pollutants and irritants. Brooks Spa Repairs is able to help with a range of water quality care and
chemical solutions for your spa.
ON-SITE SPA AND POOL CARE
We can help with full on-site spa care to help with
your busy schedule or while you are away for
periods of time. We can also help identify and solve persistant problems such as algae blooms. If you
have a swimming pool we can treat and care for it at the same time
ORDER FORM
SPA CHEMICALS VIA COURIER ACROSS SYDNEY
We can also supply a full range of spa chemicals to your home via courier in Sydney.
Our range includes: Spa Shock, Alkalinity Increaser, Filter Degreaser, Lithium Hypochlorite, Nature II
Sanitizer, Hard Cover Vinyl Protector, Test Strips (Chlorine or Nature II), Seal A Leak, Bromine Tablets
and No Foam.
CHEMICAL INSTRUCTIONS FOR Spa Sanitizer Plus
Chemicals required: Spa Sanitiser plus, Shock treatment, test kit, Alkalinity increaser, and Filter degreaser.
START UP:
1. Add 4 to 6 teaspoons of Spa sanitizer plus to spa water.
2. Run spa filter for ½ hour and test for spa Sanitiser plus level and adjust pH. ( with Alkalinity increaser)
AFTER EACH USE: Add approx 1 teaspoon of Spa Sanitiser plus no more in one day (If water appears ok).
WEEKLY 1. Add 3 Tablespoons of shock (potassium peroxy-monoslphate) with cover off and run spa for ½ hour.
2. Test for pH and total alkalinity and increase with (alkalinity increaser). If too High just leave and it should come down.
MONTHLY:
1. Follow weekly treatment.
2. Remove and clean filter.
4 MONTHLY
1. Follow weekly treatment.
2. Remove filter and soak in filter degreaser.
3. Empty and replace 100% of water.
This is a recommendation only based on 1000 Litres
CHEMICAL INSTRUCTIONS FOR LIQUID LITHIUM
Chemicals required: Liquid Lithium Hypochlorite, Shock treatment, test kit, Alkalinity increaser, and Filter degreaser.
START UP:
1. Add 80 mls of Liquid Lithium to spa water.
2. Run spa filter for ½ hour and test for Lithium level and adjust pH. ( with Alkalinity increaser)
AFTER EACH USE
Add approx 40 mls of Liquid lithium no more in one day.
WEEKLY
1. Add 3 Tablespoons of shock (potassium peroxy-monoslphate) with cover off and run spa for ½ hour.
2. Test for Lithium and adjust pH and total alkalinity with (alkalinity increaser).
MONTHLY
1. Follow weekly treatment.
2. Remove and clean filter.
4 MONTHLY
1. Follow weekly treatment.
2. Remove filter and soak in filter degreaser
3. Empty and replace 30% of water.
Based on 1000 Litres
CHEMICAL INSTRUCTIONS FOR NATURE II
Chemicals required: Nature II, Shock treatment, Liquid (lithium hypochlor),test kit, Alkalinity increaser, and Filter degreaser.
START UP
1. Fit Nature II into filter (as per instructions in box).
2. Add 80mls Liquid lithium-hypochlorite to spa water (per 1000L).
3. Run spa filter for ½ hour and test and adjust pH.
BEFORE EACH USE
Add 1 tablespoon of shock.
WEEKLY
1. Add 3 Tablespoons of shock (potassium peroxy- monoslphate (with cover off) and run spa for ½ hour.
2. Test for and adjust pH and total alkalinity with (alkalinity increaser).
MONTHLY
1. Follow weekly treatment.
2. Remove and clean filter.
4 MONTHLY
1. Remove filter and soak in filter degreaser.
2. Empty and refill spa water, renew Nature II and proceed to “START UP”.
Advantage of Nature II: No chemical smell, Ph won’t vary dramatically.
Note: If water goes Cloudy use 40 to 80ml Liquid Lithium Hypochlor.
ASK ABOUT OUR MONTHLY MAINTENANCE SERVICE
Note: These instructions are a recommendations only
Established in 1995, Brooks Spa Repairs has 30 years experience
